Cyclone Dust Collector
Economical, Centrifugal Separator for High-Volume Dust
The Donaldson Torit® Cyclone dust collector is designed specifically for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal force to remove dust particulates from the air in industrial applications. Dusty air enters the cyclone and the dust particles travel around the inner wall of the cyclone. As the particles lose their velocity, they drop lower in the cyclone until they drop into the receptical below.
Donaldson Cyclone Dust Collector
The Donaldson Torit® Cyclone dust collector is designed specifically for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal force to remove large and high-volume dust from industrial applications.
Features
- An economical solution to a wide range of dust collection problems
- Excellent for high dust load, high temperature, and product recovery applications
- Can be used alone, with optional bag filter assembly, or as a pre-cleaner
- Applications from 510 to 22,082 m³/h / 300 to 13,000 cfm
- Heavy-duty construction for long life and low maintenance
- Meets seismic zone 6.4 and 160.9 km/h / 4 and 100 mph wind load ratings
- Removable cone section for easy replacement
Operational Explanation
Dust-laden air enters the unit through the air inlet and is diverted by a helical baffle. Centrifugal force moves the heavy dust to the interior sidewalls and carries them to the base of the unit. Clean air is carried through the inner cylinder and discharges to atmosphere or optional afterfilters.
Multiple Rating Table
| Model | Nominal Airflow Range* (cfm) | Nominal Airflow Range* (m3/h) | External Static Pressure (“wg) | Inlet Velocity (fpm) | Inlet Velocity (m/min) |
|---|---|---|---|---|---|
| 12 | 300 – 540 | 510 – 917 | 5.6 – 4.1 | 3580 – 6200 | 1091.2 – 1889.8 |
| 16 | 860 – 1200 | 1,461 – 2,038 | 7.9 – 4.6 | 4380 – 6135 | 1335.0 – 1869.9 |
| 20-3 | 1250 – 2000 | 2,123 – 3,397 | 7.5 – 3.7 | 3555 – 5710 | 1083.6 – 1740.4 |
| 20-5 | 1500 – 2500 | 2,548 – 4,247 | 11.4 – 5.0 | 4290 – 7140 | 1307.6 – 2176.3 |
| 24 | 1950 – 3500 | 3,312 – 5,945 | 13.4 – 4.4 | 3580 – 6450 | 1091.2 – 1966.0 |
| 30-10 | 3000 – 4500 | 5,096 – 7,644 | 9.9 – 5.0 | 3820 – 5730 | 1164.3 -1746.5 |
| 30-15 | 4000 – 5600 | 6,795 – 9,512 | 11.0 – 4.9 | 5100 – 7140 | 1554.5 – 2176.3 |
| 36-20 | 4300 – 7000 | 7,304 – 11,891 | 11.4 – 4.9 | 4015 – 6540 | 1223.8 – 1993.4 |
| 36-25 | 4500 – 7500 | 7,644 – 12,740 | 14.9 – 6.3 | 4210 – 7010 | 1283.2 – 2136.6 |
| 36-30 | 5000 – 8000 | 8,493 – 13,589 | 16.1 – 7.1 | 4670 – 7465 | 1423.4 – 2275.3 |
| 44-40 | 8000 – 11,500 | 13,589 – 19,534 | 15.1 – 5.5 | 4530 – 6510 | 1380.7 – 1984.2 |
| 44-50 | 8000 – 13,000 | 13,589 – 22,082 | 18.8 – 7.0 | 4530 – 7360 | 1380.7 – 2243.3 |
Base Options
Resources
Product Literature
Brochure
Manual
Related Technical Articles & Case Studies
Standard & Optional Features
| Cyclone Features | Standard | Optional |
|---|---|---|
| Inlet Assembly |  | |
| 208.2 L / 55 gal Drum Base for Models 12 Through 36 | | |
| TEFC Motor* | | |
| 2.9 m3 / 103 ft3 Hopper and Legs for Model 44 | | |
| 208/230/460/60/3 Voltages | | |
| 10-Year Warranty | | |
| Power Pack | | |
| Explosion-Proof Motors | | |
| 50 Hz, Single Phase Motors | | |
| Steel or Aluminum Fan Wheels | | |
| Hopper Base | | |
| Two 208.2 L / 55 gal Drum Base for Models 20, 24, and 30 | | |
| Cabinet Base for Models 12, 16, 20, 24, and 30 | | |
| Surge Hopper | | |
| Silencer | | |
| Exhaust Accessories | | |
| Attenuator | | |
| Bag Filter Options | | |
| Bag Filter Enclosure | | |
| Explosion Vent | |
*All 60 Hz motors 1 HP and above are EISA compliant and considered NEMA Premium® per Table 12-12. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.
